MJQ-500-2D crystal ball forming machine, front view

Agar crystal ball line

Crystal ball forming machine

Model: MJQ-500-2DOutput: 800–1,000 kg/h, 10 mm mould (varies with colloid viscosity)Power: 57 kW · 380 V / 50 Hz, three phase five wire

The double-station former that most agar crystal ball plants are built around — two forming heads, one calcium circuit, one cooling loop.

Tell us your product, target output and packaging requirements.

Product overview

The machine carries the whole forming step in one frame: an insulated jacketed hopper holding the agar colloid at about 70 °C, a screw pump driven by a servo and reduction gear, a quick-release forming head and a pneumatic shear. Extruded strands are cut into drops that fall into the calcium bath, gel and are carried out by the bath flow — no manual transfer between steps. Two forming trains run on one calcium and cooling circuit, so extrusion speed and shear interval can be set per train for two different ball diameters at the same time. A touch-screen PLC holds the bath temperature, alarms on low water or a blocked filter, and the whole forming head lifts electrically for cleaning. Changing the mould plate changes the ball size.

Technical specifications

Reference information from the current equipment catalogue. Final configuration, output and supply scope are confirmed for your project.

ModelMJQ-500-2D
Output800–1,000 kg/h, 10 mm mould (varies with colloid viscosity)
Forming trains2 forming + 1 calcium / cooling circuit, independent settings
Curing time1–3 min, set by the head-to-outlet level difference
Hopper temperature≈70 °C, jacketed, automatic
Power57 kW · 380 V / 50 Hz, three phase five wire
Air supply0.6–0.8 MPa
Chilled water40 m³/h at 7–12 °C, supplied by customer
Dimensions / weight3,550 × 2,300 × 2,700 mm · approx. 2,000 kg
ControlPLC + touch screen; low-water, filter-block and over-temperature alarms
ConstructionSUS304 contact parts; SUS316L on request
Lead time30–45 working days

Production line applications